# how do you measure paper

Use arulerto measure the length of the paper from top to bottom. Line up the edge of the ruler so that it鈥檚 flush with the bottom of the piece of paper. Look at where the top of the paper meets the ruler to get the measurement. Use a ruler that includes both inches and centimeters so you can get the most accurate reading possible.

• ### How do you measure the width of a piece of paper?

• Place a ruler along the short edge of the paper to measure the width. Make sure the edge of the ruler is lined up with the edge of the piece of paper. Get the reading by looking at where the opposite side intersects with the ruler.

• ### How do you find the thickness of a sheet of paper?

• Put together a sufficient amount of paper, measure the thickness, then divide by the total of paper sheets. You will get the thickness of each paper sheet. Suppose that each paper has the same thickness for all.

• ### How to measure the thickness of paper with a ruler?

• Measuring Paper Thickness with a Ruler 1 Stack up Sheets. Because rulers are less accurate than both calipers and micrometers, you鈥檒l need to stack at least 1-inch thick to get an ideal measurement. 2 Measure the Stack/Ream. With the stack or ream ready, you can start measuring to see the total thickness. … 3 Calculate the Thickness. …

• ### How do you measure point value on paper?

• Points are measured simply by using calipers to measure the thickness. Each point represents 1/1000th of an inch. Some examples of common point sizes, and how they might be written are as follows: 8 pt, 10 pt, 12 pt, 14 pt, and 16 pt paper. The higher the point value, the thicker the paper.